Technical Parameters
Products Name |
Air Cooling Surface discharge 15g/H ozone generator accessories |
Model No |
PM-15G |
Ozone production |
15G/H |
Product composition |
high frequency and high voltage power supply + surface discharge ozone tube |
Power consumption |
95W |
Net weight |
0.8KG |
Ozone Concentration |
20-40ppm |
Cooling mode |
Air cooling |
Dimensions |
Ozone tube: 155x75x90mm Power supply:160*65*55mm |
Working environment |
Dry and clean, the temperature is less than 40ºC, the relative humidity is ≤95%RH;
it is strictly prohibited to use in flammable and explosive places |
Ozone tube material |
The inner electrode is titanium alloy, the outer electrode is 316L stainless steel mesh,
the dielectric material is dehydroxyl quartz tube, and the mounting bracket is PVC plastic. |
Note |
The service life is at least 3 times longer than that of traditional ceramics, no moisture absorption,
no high pressure breakdown. If there is dust on the surface, it can be restored to normal operation by blowing it clean. |
Installation method: The ozone tube is installed in an environment with air convection to ensure that the surface temperature of the ozone tube is not higher than 60ºC for long-term operation, and the high-voltage power supply is more than 3 cm away from the metal shell.
Main features: Tubular surface discharge; high-density discharge, which can be started after power on.
Product features: Dielectric material: high-purity silica dehydroxylation quartz tube, dehydroxylated up to 10PPM, high dielectric, twice that of ceramic substrate, 2.5 times that of ordinary glass tube, breakdown voltage 35KV. There is no high voltage breakdown within 5 years of normal operation. The temperature resistance of the quartz tube is 1800 degrees, which is 4 times that of ordinary glass. The accuracy of the discharge gap can still be ensured under high temperature conditions.
Discharge electrode: It is made of high-precision processing of medical grade 316L stainless steel, which will not rust or corrode after years of work.
Discharge gap: high-precision gap control, discharge gap 0.4mm-0.5mm, uniform high-voltage discharge, high ozone concentration, high yield ratio, effective energy saving
Cooling method: air cooling or water cooling, aluminum alloy solar radiator, oxidation treatment. The surface of the radiator is hardened and does not change color after long time use.
Top 3 advantages:
- Sufficient Ozone output
- High concentration
- Long working life
1. The ozone generator is a box type. The air compressor, ozone discharge chamber, power control board, and other accessories of air source part are in the same box.
2. The ozone discharge chamber is our company's patented technology. The outer electrode is made of stainless steel and adopts a high-concentration ozone tube. The entire discharge chamber adopts fully sealed technology, which is reliable in operation.
3. The power supply unit (PSU) is the core technology of this series of models. It includes two major processes: frequency conversion and boost. It is equipped with an automatic soft start function, has a strong load capacity and multiple protection functions, and is efficient and stable.
Ozone sterilization ability
Ozone has strong oxidation, has been recognized as a kind of broad-spectrum efficient fungicide, 600-3000 times faster than the chlorine in the water, and even can kill bacteria, within a few seconds including common coli, streptococcus, pseudomonas aeruginosa, staphylococcus mould etc. If keeping the environment 0.3 PPM concentrations of ozone in 5 minutes, the killing rate can reach more than 99%.Its sterilization and disinfection effects occur almost instantaneously. When ozone concentration in water reaches 0.3-2ppm, bacteria can be killed within 0.5-1min.The dose of ozone water is required to achieve the same sterilization effect (e.g., 99% of escherichia coli kill rate) is only 0.0048% of that of chlorine.
For a long time, in medical and health, pharmaceutical, food processing and other aspects, disinfection and sterilization of water and air has been used ultraviolet radiation, chemical fumigation, spraying and other methods, there are many defects in the use. The emergence of ozone sterilization and disinfection products provides a fast, efficient, safe and reliable disinfection method, which is the ideal substitute for traditional disinfection equipment and will inevitably be widely used.
Ozone O3 is the oxygen O2 isomorphism, the composition element is the same, the composition form is different, the property is very different. Ozone is gaseous at room temperature, colorless and grassy at low concentration, and soluble in water. It is known as one of the strongest oxidants. The chemical properties of ozone are more active and have strong oxidation ability. When met with bacteria and harmful chemicals (such as formaldehyde, benzene, ammonia), it immediately produces oxidation reaction, so as to play the function of sterilization and disinfection, mildew, taste, decomposition of harmful gases and so on. Ozone is unstable, and its aerobic O2 changes, reducing it to O2, within a few minutes, so it is free of pollution and residue. It is so far the world recognized that food and beverage direct disinfection of the only substance!
The high concentration ozone generator produced by our company is a kind of high concentration ozone generator equipment dedicated to air purification and water treatment. It adopts the latest ozone generating device and many kinds of protection function circuits inside, and has excellent performance and extremely long working life.
Workshop
Package and delivery
Why Choose Us?
1. EXPERIENCE :11 years focus on ozone generator R&D and manufacture,service of more than 1000 customers.
2. 30000 square meter factory area
3. Core patent technology and authorized certifications
4. Strict quality control to ensure safe and reliable products
5.Service: 24 hours online service,life-long maintenance
6.Professional overseas sales team, supply prompt response
FAQ
1. Are you trading company or manufacturer? |
We are manufacturer and trader. |
2. How long is your delivery time? |
Generally it's 5 days if the goods are available. It would be 20-30 days based on ozone application and capacity requirements.We could supply ODM and OEM, design layout based on actual working condition. |
3. Do you provide samples? |
Yes, we could offer the sample. After receiving 100% payment, we will deliver the sample to you as soon as possible. |
4. What is your term of payment? |
30% T/T in advance, balance before shippment. |
5. How do you control quality? |
The company strictly implements the ISO9001 quality management system, has passed ISO14001, ISO18001 management system certification and SGS. In addition, we have more than 20 patents technology to ensure stable and reliable product quality. |
6. Does your product have any warranty? |
Yes, we offer 12 months warranty from the date of the customer's confirmation.Beyond the warranty, we will also supply life-long maintenance but we will charge maintenance fee. |
Please contact us NOW for professional service and top products!