Technical Parameters
| Model |
Ozone production |
Feed gas flow |
Ozone
Concentration |
Cooling water flow |
Power consumption |
Dimension(mm) |
| g/h |
Nm³/h |
mg/L |
m³/h |
Kwh/kgO³ |
W D H |
| POZNA-10 |
10 |
0.35-5 |
20-30 |
0.02-0.03 |
0.16-0.18 |
500x400x1300 |
| POZNA-20 |
20 |
0.7-1.0 |
20-30 |
0.04-0.06 |
0.32-0.36 |
600x600x1600 |
| POZNA-30 |
30 |
1.1-1.5 |
20-30 |
0.06-0.09 |
0.5-0.55 |
600x600x1600 |
| POZNA-50 |
50 |
1.7-2.5 |
20-30 |
0.1-0.15 |
0.8-0.9 |
800x600x1600 |
| POZNA-80 |
80 |
2.8-4.0 |
20-30 |
0.16-0.25 |
1.28-1.5 |
1000x800x1700 |
| POZNA-100 |
100 |
3.5-5 |
20-30 |
0.3-0.4 |
1.6-1.8 |
1000x800x1700 |
| POZNA-200 |
200 |
7-10 |
20-30 |
0.6-0.8 |
3.2-3.6 |
1200x800x1700 |
| POZNA-300 |
300 |
10.5-15 |
20-30 |
0.9-1.2 |
4.8-5.4 |
1200x800x1700 |
| POZNA-400 |
400 |
14-20 |
20-30 |
1.2-1.6 |
6.4-7.2 |
1400x800x1700 |
| POZBA-500 |
500 |
17.5-25 |
20-30 |
1.5-2.0 |
8-9 |
1400x800x1700 |
| POZBA-600 |
600 |
21-30 |
20-30 |
1.8-2.4 |
9.6-1.08 |
1400x800x1700 |
| POZBA-800 |
800 |
28-40 |
20-30 |
2.4-3.2 |
12.8-14.4 |
1800x800x1800 |
Note:
1. Power consumption is based on different ozone concentration and cooling water conditions.
2. Customerize for higher ozone concentration ozone generator.
Work Diagram
Basic knowledge of ozone
Ozone is an oxygen molecule made up of three oxygen atoms. The molecular formula is O3, one of which is connected with the other two oxygen atoms in the form of a single bond. Ozone is known as "green chemicals", is a strong oxidizing agent. It has four main functions of sterilization, decolorization, oxidation, deodorization and no residue, no pollution, is one of the environmental friendly green industrial raw materials. Ozone is one of the most powerful solutions for municipal, industrial and commercial water treatment challenges.
The sterilization ability
Ozone has strong oxidation, has been recognized as a kind of broad-spectrum efficient fungicide, 600-3000 times faster than the chlorine in the water, and even can kill bacteria, within a few seconds including common coli, streptococcus, pseudomonas aeruginosa, staphylococcus mould etc. If keeping the environment 0.3 PPM concentrations of ozone in 5 minutes, the killing rate can reach more than 99%.Its sterilization and disinfection effects occur almost instantaneously. When ozone concentration in water reaches 0.3-2ppm, bacteria can be killed within 0.5-1min.The dose of ozone water is required to achieve the same sterilization effect (e.g., 99% of escherichia coli kill rate) is only 0.0048% of that of chlorine.
Environmental conditions
| Operating Temperature |
0ºC to +40ºC |
| Altitude |
If >1000 meters above sea level, the cooling effect become bad and the air outlet of air compressor will reduce |
| Humidity |
Maximum 85% relative humidity |
| Atmosphere |
Non-flammable, corrosive and conductive dust |
| Atmospheric Pressure |
101.3KPa standard atmospheric pressure is required |
| Working Area Conditions |
Keep the room for ozone generator system dry and ventilated |
Our Core Technology
Ozone discharge chamber technology
Special glass tube discharge chamber(Patent No ZL2011 2 0385785) adopts double air gap discharge technology, high quality glass medium and matching dedicated power supply, fully exerts the efficiency of corona discharge to produce ozone, ensuring large output, high concentration and lower power consumption.
High power ozone dedicated dry-type transformer technology
The high voltage transformer converts the alternating current output from the inerter circuit into high voltage electricity suitable for generation of ozone by generating a dielectric barrier discharge in the chamber discharge body. In order to match the capacitive characteristics of the occurrence of the discharge of the chamber discharge body, the requirements of its parameters are different from those of ordinary transformers.
Ozone special frequency conversion power supply technology
The ozone generator control system is independently developed by the company to control the normal operation of the ozone generator power supply, and has anti-jamming, load short circuit protection, high operating temperature protection, with industry leading level, high operation reliability.
Waste water treatment oxidation process by ozone
- It is generally used for the outlet end of water, further reducing COD, decolorizing and ensuring the effluent index.
- The upgrading of grade B to A is achieved by ozone plus filtration technology.
- Intermediate water reuse is applied to bleaching and deodorization
Ozone function
- To further degrade the biodegradable organic matter.
- Reduce the chromaticity and turbidity of the effluent.
- Kill Escherichia coli and virus in water
- Remove the odor of water
Our Products advantage
- All in one equipment, easy to operate
- Over temperature protection, over-current protection, and over-voltage abnormality monitoring.
- Ozone leakage alarm, operation fault alarm monitoring
- Supply full set of auxiliary equipment, including air compressor, gas storage tank, filter, freezing dryer, adsorption dryer etc.
- Use special stainless steel tube for discharge chamber
- With SIEMENS PLC touch screen automatic control system, users can achieve monitoring, control, switching, setting, report, alarm, cycle start-up, emergency shutdown etc. functions.
Field Installation
Why Choose Us?
1. EXPERIENCE :11 years focus on ozone generator R&D and manufacture,service of more than 1000 customers.
2. 30000 square meter factory area
3. Core patent technology and authorized certifications
4. Strict quality control to ensure safe and reliable products
5.Service: 24 hours online service,life-long maintenance
6.Professional overseas sales team, supply prompt response
FAQ
| 1. Are you trading company or manufacturer? |
| We are manufacturer and trader. |
| 2. How long is your delivery time? |
| Generally it's 5 days if the goods are available. It would be 20-30 days based on ozone application and capacity requirements.We could supply ODM and OEM, design layout based on actual working condition. |
| 3. Do you provide samples? |
| Yes, we could offer the sample. After receiving 100% payment, we will deliver the sample to you as soon as possible. |
| 4. What is your term of payment? |
| 30% T/T in advance, balance before shippment. |
| 5. How do you control quality? |
| The company strictly implements the ISO9001 quality management system, has passed ISO14001, ISO18001 management system certification and SGS. In addition, we have more than 20 patents technology to ensure stable and reliable product quality. |
| 6. Does your product have any warranty? |
| Yes, we offer 12 months warranty from the date of the customer's confirmation.Beyond the warranty, we will also supply life-long maintenance but we will charge maintenance fee. |
Contact us today for your needs!
){kind=link}